Automation – One Project At A Time
Shane Baldacchino I recently had the pleasure to present an Azure ARM templates 101 to Melbourne Infrastructure Coders. I want to thank all of those who attended, David Lutz (@dlutzy) and Matthew Jones (@geekle) for facilitating and REA for the use of their facilities. My presentation, Automation and Scale On Azure – An Introduction To ARM Templates, … Read more
It has been almost 5 years of automating our house and during that time most systems have been automated successfully. These days it is about fine tuning and this is what this post is about. Our house is on the largish side and contains three Cisco Aironet AP’s to provide a unified hidden SSID. We … Read more
Landscaping our house has always been something on the cards for our family but it was placed on the back burner due to differing priorities. It wasn’t until our body corporate put this on the agenda did we get pretty serious about it. Whilst technically I find I can learn grasp most things life, design … Read more
Whilst very busy I host a handful of websites for friends and family from my garage fibre connection. The thing is my ISP doesn’t provide me an a static IP address. This is obviously an issue when hosting websites. This can be solved in one of two ways 1. obtain a static IP address either … Read more
Before we started landscaping I had grand plans for irrigation for our house. It was borne out of two desires. 1. With a growing busy family I can’t guarantee that our plants and lawn can be watered 2. Because I can What quickly became apparent on my home automation journey is that the more sensors … Read more
WARNING : Electricity can be lethal, this work should only be attempted by a licensed electrician On my list of things to automate around my house is HVAC . This article is describes how I hooked a multi-zone heating system up to my Homevision Pro automation controller. It does not cover all of the programming and smarts … Read more
WARNING : Electricity can be lethal, this work should only be attempted by a licensed electrician The last major item on my automation to-do list was access control. Many basic alarm systems do this but I needed more. As I plan leverage this system as my eyes finding the right solution was paramount to the … Read more
This article describes how I interfaced a NAD T163 pre-amplifier with my Homevision Pro automation controller. It does not cover all of the programming and smarts around the installation. In reality this article will provide guidance for any automation system. Bill of Materials– 2 x RS232 DB9 adapters ($8 AUD)– 1 x Interfacing cable between … Read more